Dear Team,

 To capture the packets please refer the document.

Capturing traffic
Login to the system shell as a root user and execute command that would match the port for
traffic you would like to capture:
Full SIP traffic
tcpdump port 5060 -s 0 -w debug.pcap
SIP traffic for specific IP address
tcpdump -i any port 5060 and host -s 0 -w debug.pcap
SIP + RTP traffic for specific IP address
tcpdump -i any host -T rtp -vvvvv -s 0 -w test.pcap
NOTE: Please replace IP address so it matches the host you want to perform debugging for
(most often that will be your provider IP).
tcpdump -i any port 25 -s 0 -w debug.pcap -vv
Analyzing captured traffic
Download the file from PBXware by either using GUI utilities that support connection on port
2020 or using SCP from terminal:
scp -P 2020 root@ip.address:/path/to-the/file /destination/folder/on/your/hdd/
Download 'Ethereal' program from 'http: //'
Open your saved file with 'Ethereal' program and analyze the content.
If you don't have the knowledge to analyze the captured traffic Bicom Systems Support team
will be glad to do it for you.